¢Ê Technical Specification

1. Indication of B.A.C.: (Full 3 decimals)
                                  0.000 to 4.000 ¢¶
                                  or 0.000 to 4.000 ¢¶
                                  or 0.000 to 0.400%BAC by LCD display
2. Warm up time : within 25 seconds
3. Response time : within 3 seconds
4. Sensor : Semiconductor type alcohol sensor
5. Use mouthpiece
6. Power : Two 1.5V "AA" size alkaline battery and 12V cigar jack in car
7. Continuous using time without battery change : 200 times with fresh batteries
8. Weights : 103g (Including Batteries)
9. Dimension (mm) : 116 (height) X 50 (width) X 21 (thickness)
10. Audible warnings : 3 steps beep warning of alcohol detection with LED display
11. Auto power off
12. Accuracy : +/-0.010%BAC at 0.050%BAC
13. Remark
     1) Battery low indication
     2) Air flow rate checking
     3) Self sensor testing
     4) EASY to replace the sensor

¢Ê  Certificated CE

• This product should be used only to give an indication of the possible presence of alcohol in the blood. Do not use it to determine intoxication or whether it is safe to drive a vehicle or operate equipment! This product is just for your reference. This detector assumes no liability for the result of alcohol use.
• Do not use it while drinking or smoking. (Measuring alcohol level at least 30 minutes after consuming alcohol)