¢Ê Technical Specification

1. Indication of B.A.C. : *Active Mode:
                                  0.00 to 4.00 ¢¶
                                  or 0.00 to 2.00 mg/l BrAC
                                  or 0.000 to 0.400%BAC by LED display
                                  or 0.000 to 0.400%BAC by LED display
                                  *Passive Mode (screening)
                                  ¡°0¡±, ¡°Low¡± and ¡°High¡± 3 steps
2. Warm up time : within 25 seconds
3. Response time : within 5 seconds
4. Sensor : Semiconductor type alcohol sensor
5. Use mouthpiece in Active Mode
6. No mouthpiece in Passive Mode
7. Power : Two 1.5V "AA" size alkaline battery
8. Continuous using time without battery change : 200 times with fresh batteries.
9. Weights : 115g (Including Batteries)
10. Dimension (mm) : 124 (height) X 56 (width) X 41 (thickness) Max.
11. Audible warnings : 3 steps beep warning of alcohol detection with LED display
12. Auto power off
13. Accuracy : +/-0.01%BAC at 0.05%BAC
14. Remark
     1) Battery low indication
     2) Air flow rate checking
     3) Self sensor testing

¢Ê  Registered FDA 510K listed, DOT approval, CE approval, RoHS Approval, Australian Standard Approval

• This product should be used only to give an indication of the possible presence of alcohol in the blood. Do not use it to determine intoxication or whether it is safe to drive a vehicle or operate equipment! This product is just for your reference. This detector assumes no liability for the result of alcohol use.
• Do not use it while drinking or smoking. (Measuring alcohol level at least 30 minutes after consuming alcohol)