¢Ê Technical Specification

1. Indication of B.A.C. : 0.00 to 4.0 ¢¶ (Promile) by LCD display
                                 or 0.00 to 2.0mg/l BrAC
                                 or 0.00 to 0.40%BAC
2. Warm up time : ¡´ 30 seconds
3. Response time : within 2 seconds
4. Maximum test times in 1 minute : 10 times
5. Recycle time : ¡´ 20 seconds
6. No need to use mouthpiece
7. Sensor : Semiconductor type alcohol sensor
8. Power supply : Two 1.5V "AA" size alkaline battery
9. Continuous using time without battery change : 2 hours
10. Weights : 85g
11. Dimension (mm) : 104 (height) X 40 (width) X 20 (thickness)
12. Audible warnings : 3 steps beep warning of alcohol detection with LED display
13. Auto power off

¢Ê Certificated, CE, FDA, RoHS, DOT

• This product should be used only to give an indication of the possible presence of alcohol in the blood. Do not use it to determine intoxication or whether it is safe to drive a vehicle or operate equipment! This product is just for your reference. This detector assumes no liability for the result of alcohol use.
• Do not use it while drinking or smoking. (Measuring alcohol level at least 30 minutes after consuming alcohol)